750RK (Seca)

Middle Gear Damper

MIDDLE GEAR/DAMPER

Clutch

CLUTCH

Front Brake

FRONT BRAKE (MASTER CYLINDER)

 

 

 

Clutch and Shifter Reassembly

5. Clutch assembly

a. Install the thrust plate onto the transmission main axle.

1. Thrust plate

b. Install the oil pump drive sprocket onto the main axle without the spacer collar and place the oil pump drive chain on its sprocket.

1. Oil pump drive sprocket

Tags:

Swing Arm, Rear Shocks, Cables and Fittings

SWING ARM

A. Inspection

1. Free play inspection

Remove the rear wheel and both shock absorbers. Grasp the swing arm and try to move it from side to side as shown. There should be no noticeable side play.

Wiring Diagram

XJ750RH WIRING DIAGRAM

 

 

 

 


Tags:

Cylinder Head Removal

ENGINE OVERHAUL

A. Cylinder Head and Cylinder

1.    Remove the cylinder head cover.

2.    Remove the left crankcase cover (pickup coil cover).

3.    Remove the cam chain tensioner.

Tags:

Lower Crankcase Reassembly

2. Lower crankcase

a.   Install the shift cam and secure it with the guide pin. Install the stopper plate and bolt and tighten securely.

b.   Install the neutral switch.

c. Install the transmission drive axle assembly into the crankcase.

Tags:

Cylinder and Cylinder Head Disassembly

 

13. Remove the front cylinder holding nut and remove the cylinder assembly. It may be necessary to tap the cylinder lightly to loosen it from the base gasket.

14. Remove the rear cam chain guide by loosening the holding bolt.

Tags:

Chassis Maintenance