700XN (MaximX)

SIGNAL SYSTEM

FRONT BRAKE

INSPECTION

1. Inspect the starter plunger 1 for damage. Replace if damaged or worn.

• Vacuum piston 2. Replace if scratched/worn.

•Throttle valve diaphragm 3. Replace if torn or damaged.

REMOVAL AND DISASSEMBLY

1.  Drain  coolant

2.  Remove  horns 1

3.  Disconnect  electrical leads 2

1.  Refer to engine removal. Reverse those removal steps that apply.

2.  Tighten engine mounting bolts

Engine Mounting Bolt: Front 1: 42 Nm (4.2 m-kg, 30 ft-lb) 
Rear 2 : 90 Nm (9.0 m-kg, 65 ft-lb) 
Down Tube 3 , Bracket 4 : 33 Nm (3.3 m-kg, 24 ft-lb)

COOLANT DRAINING

Do not remove the radiator cap when the engine and radiator are hot.

1. Remove:
•Cap retainer 1 
 Radiator cap 2

2.  Place an open container under the engine.

LUBRICATION DIAGRAM

Chassis